What Is an Andon System? Meaning, Applications & How It Works

An andon system is a visual and audible alert system that lets an operator or a machine flag a production problem the instant it happens, so the right person responds before it turns into downtime or defects. It started on Toyota’s assembly lines, but today’s andon runs on software, mobile alerts and live monitoring boards, and it works in any plant with a repeating process.

What Is an Andon System?

An andon system is a shop-floor communication tool that signals an abnormality, such as a machine fault, a quality defect, a material shortage or a safety issue, and calls the right team to that exact station. The signal can come from an operator pressing a button or pulling a cord, or automatically from a machine, sensor or PLC.

The word “andon” (行灯) is Japanese for a traditional paper lantern. In manufacturing, it became the name for the lights and boards that “light up” a problem so nobody can miss it. Andon is a core tool of jidoka, the Toyota Production System principle of stopping to fix a problem at its source instead of passing it downstream. The Lean Enterprise Institute’s andon definition and Toyota’s own overview of the Toyota Production System give the original context.

In short: An andon system makes production problems visible the moment they occur and routes them to the people who can fix them. The name comes from the Japanese paper lantern, and the idea comes from lean manufacturing.

Where Did the Andon System Come From?

The andon system grew out of Toyota’s jidoka thinking, but its roots go back further than most guides admit. In 1896, Sakichi Toyoda built a power loom that stopped automatically when a thread broke, so one worker could watch several looms and attend only to the one with a problem. That idea of “stop and signal on abnormality” became a pillar of the Toyota Production System.

Toyota did not invent the stop cord alone, though. Ford plants used a similar cord before 1930, letting any worker halt the line when problems overwhelmed them. Toyota’s contribution was to standardise the signal, pair it with a guaranteed response, and treat every pull as a chance to improve. Today, andon has moved from cords and lamps to networked, software-driven systems.

In short: Andon traces back to Toyoda’s self-stopping loom and early Ford stop cords. Toyota turned it into a disciplined system of signal, response and improvement.

How Does an Andon System Work?

An andon system works in four steps: a trigger raises an alert, the alert reaches the right person, that person resolves the issue, and the system records the event. When any step is missing, the system becomes a light that nobody trusts.

  1. Trigger: An operator presses a call button, or a machine signal or sensor detects a fault.
  2. Alert: A stack light changes colour, the andon board shows the station, and a buzzer or mobile notification reaches the assigned responder.
  3. Response: Maintenance, quality or materials staff reach the station and fix the issue, with escalation if nobody responds in time.
  4. Record: The system logs the station, reason, response time and duration.

Here is a simple example. An operator on a packing line notices labels printing off-centre and presses the yellow “quality” button. The stack light turns yellow, the line board shows “Station 4 – Quality,” and the quality lead gets a phone alert. The lead adjusts the printer within minutes, and the event is logged. That is far better than discovering a full pallet of mislabelled cartons at dispatch. For a deeper look at how this cuts downtime and speeds up response, read our guide on andon system benefits in manufacturing.

In short: Trigger, alert, response and record form the andon loop. The record step turns one-off fixes into data you can use to prevent repeat problems.

What Are the Components of an Andon System?

An andon system has five building blocks: inputs that raise the alert, logic that decides who gets it, displays that show it, notifications that reach people away from the line, and software that stores the data.

ComponentCommon examplesJob it does
Input devicesPush buttons, pull cords, foot switches, machine signals, sensors, PLC outputsRaise the alert at the station
Controller / logicAndon controller, IoT gateway, andon software rulesDecide alert type, priority, owner and escalation timing
Visual and audible displaysStack lights, andon boards, takt boards, LED displays, buzzersShow where the problem is and what kind it is
Remote notificationsMobile apps, SMS, email, smartwatches, wearablesReach responders who are not near the board
Software and dataEvent logs, dashboards, downtime reports, ERP/MES integrationRecord every call for analysis and improvement

The andon lamp is the most visible part, which is why people often mistake it for the whole system. A lamp with no owner, no escalation and no record is only a signal, not a system.

In short: A complete andon system combines inputs, logic, displays, notifications and data. Missing the logic or data layers is the most common reason andon fails to improve anything.

What Do Andon Light Colours Mean?

Andon light colours tell everyone the status of a station at a glance. Green, yellow and red are near-universal, while other colours vary by plant.

ColourTypical meaningUsual response
GreenNormal operationNone
Yellow / amberProblem raised, help needed, line still runningTeam lead or support goes to the station
RedLine or machine stoppedImmediate response and escalation
BlueMaterial or parts request (in many plants)Stores or logistics replenish
WhiteChangeover, maintenance or a custom statusDepends on the plant’s standard

Colour meanings are not an international standard. Document your own colour code, display it near every line, and keep it identical across all lines so operators learn it once.

In short: Green means running, yellow means help needed, and red means stopped. Treat blue and white as plant-specific and write your code down.

What Are the Types of Andon Systems?

Andon systems fall into five practical types based on how the alert is raised and delivered: manual, machine-triggered, digital, wireless and mobile. Most modern plants combine several.

TypeHow the alert is raisedBest forLimitation
Manual andonOperator presses a button or pulls a cordAssembly lines and operator-paced workDepends on operators choosing to call
Machine-triggered (automatic) andonPLC, sensor or machine fault signalAutomated and semi-automated machinesOnly catches faults the machine can detect
Digital andonSoftware routes alerts, logs events and escalatesPlants that want data and accountabilityNeeds setup of alert types and owners
Wireless andonBattery or wireless buttons and lightsRetrofits and lines where cabling is costlySignal coverage must be checked on the floor
Mobile / wearable andonAlerts pushed to phones, tablets or smartwatchesMaintenance teams that move across the plantNeeds reliable Wi-Fi or network coverage

One myth deserves correcting: an “automatic” andon does not fix problems by itself. It detects and signals faults, and sometimes stops a machine, but people still resolve the root cause. Machine-triggered andon usually relies on IoT connectivity, which our Industry 4.0 and IIoT solutions and IoT hardware support, while mobile alerts can run on rugged wearables.

In short: Manual andon relies on operators, machine-triggered andon relies on signals, and digital, wireless and mobile andon change how alerts travel and get recorded. No type removes the need for a human response.

What Is an Andon Monitoring System?

An andon monitoring system is the central software layer that tracks every andon alert across lines in real time, showing open calls, response times, escalations and downtime history on one dashboard. It turns individual station lights into a plant-wide view.

A useful andon monitoring system should show:

  • Live status of every line and station
  • Open calls by type, with elapsed time
  • Calls that have breached their response target and been escalated
  • Response time and time to resolve, by shift and by fault type
  • The top repeat stoppage reasons for the week or month

The value lies in the patterns. When the monitoring screen shows that one station raises the same material call every afternoon, the fix is a better replenishment schedule, not a faster runner. Pairing andon monitoring with WIP tracking also shows which jobs were held up behind each stoppage.

In short: An andon monitoring system gives supervisors and managers a live, plant-wide view of every alert and its history. It is what makes andon data usable for continuous improvement.

What Is an Andon Application?

“Andon application” has two meanings: the uses of andon on a shop floor, and the software app that runs a digital andon system. Both matter when you plan a rollout.

As a use: an andon application is any process where andon signals a problem. Common examples include machine breakdowns, quality defects, material shortages, safety concerns, changeover help and requests for a supervisor.

As software: an andon app is the program, on a PC, tablet or phone, that raises, routes, escalates and logs andon calls. A good andon application should let you:

  • Define alert types (breakdown, quality, material, safety) and assign an owner to each
  • Set escalation timers so unanswered calls climb automatically
  • Send alerts to boards, phones and wearables at the same time
  • Log every call with station, reason, response time and duration
  • Integrate with your ERP, MES or production reporting so data stays consistent

In short: An andon application is both a use case on the floor and the software that manages andon calls. Choose software that routes, escalates, logs and integrates, not just software that lights a screen.

Where Are Andon Systems Used?

Andon systems are used in any operation with repeating processes where a delay or defect is costly. They started in automotive, but they now cover most manufacturing sectors and some service operations.

IndustryTypical andon triggers
Automotive and auto componentsAssembly line stops, torque or fitment defects, part shortages
ElectronicsSoldering or test failures, component shortages, ESD issues
PharmaceuticalsPacking line faults, labelling or serialisation errors, line clearance calls
Food and beverageFiller or capper faults, seal or label defects, hygiene concerns
ChemicalsBatch deviations, equipment alarms, safety calls
Ceramics and sanitarywareKiln or press faults, glaze or finish defects
Warehousing and logisticsDock delays, conveyor jams, picking exceptions

Andon thinking also works outside factories. Amazon’s “virtual andon” lets customer service staff pull a product listing when the same complaint keeps coming up, and hospitals use similar call systems for patient safety. See how one plant applied it in our manufacturing andon system case study.

In short: Andon suits automotive, electronics, pharma, food, chemicals, ceramics and warehousing. The trigger changes by industry, but the principle of signal, respond and record stays the same.

Andon vs Andon Cord vs Andon Board vs Takt Board vs Kanban: What’s the Difference?

The andon system is the whole alert-and-response process, while the andon cord, andon board and takt board are parts of it or tools beside it. Kanban is a separate lean tool that signals replenishment, not problems.

TermWhat it isWhat it signals
Andon systemThe complete trigger, alert, response and record processAny abnormality
Andon cord / buttonThe input device an operator uses“I need help here”
Andon light / stack lightA lamp on a machine or stationStatus of that one station
Andon boardA display summarising many stationsWhere problems are across a line or zone
Takt boardA display comparing output to takt timeWhether production keeps pace with demand
KanbanA card or signal for replenishment“Make or move more of this”

Andon and takt boards often share a screen, which is how our Andon and Takt Board solution shows both problems and pace in one place.

In short: The cord and board are parts of an andon system. A takt board tracks pace, and kanban triggers replenishment. Each does a different job.

How Do You Know Your Plant Needs an Andon System?

Your plant likely needs an andon system if problems are found late, help is hard to reach, or nobody can say which stoppages cost the most time. These signs are common:

  • Stopped machines sit unnoticed until a supervisor walks past
  • Operators leave their station to find maintenance or quality staff
  • Defects are caught at final inspection instead of at the station that caused them
  • Downtime reasons live in memory or on paper logs, if they are recorded at all
  • The same stoppage repeats every week and nobody owns the fix

If three or more apply, a one-line andon pilot will usually show results quickly. Plants that still rely on paper logs can digitise them with E-Log Sheets so andon data and shift records feed the same review. When you are ready to scope it, explore our Andon and Takt Board solution or talk to our team.

In short: Late problem detection, slow help and unrecorded downtime are the clearest signs you need andon. Start with one line, measure the baseline, and scale what works.

Frequently Asked Questions

What does andon mean in Japanese?

Andon means “paper lantern” in Japanese. Traditional andon lanterns used paper stretched over a wooden or metal frame around a lamp. Manufacturers borrowed the word for lights and boards that make shop-floor problems visible.

What is an example of an andon system?

A classic example is a Toyota assembly line, where an operator pulls a cord to call the team leader when something goes wrong at their station. A modern example is a packing line where a machine fault automatically turns the stack light red, updates the line board and sends a mobile alert to maintenance.

What is the difference between manual and automatic andon?

Manual andon is triggered by a person pressing a button or pulling a cord, while automatic andon is triggered by a machine, sensor or PLC signal. Most plants use both. Operators catch quality and material issues that machines cannot see, and machines report faults instantly without anyone having to notice them.

Does pulling the andon always stop the production line?

No, pulling the andon does not always stop the line. Many systems use a yellow call that summons help while the line keeps running, and stop the line only if the problem cannot be fixed within the cycle or by a fixed point. Red usually means a stop, and yellow means help is needed.

Can an andon system work with older machines?

Yes, an andon system can work with older machines. You can start with operator buttons and wireless lights that need no machine connection, then add signals from PLCs or retrofit IoT sensors later. Many plants begin with manual calls and connect machine data once the habit of calling for help is in place.

Is andon part of lean manufacturing or Six Sigma?

Andon is a lean manufacturing tool that comes from the Toyota Production System and supports jidoka. Six Sigma teams also use andon data, because the logged events show where defects and variation start, which feeds root cause analysis.

Is andon used outside manufacturing?

Yes, andon is used outside manufacturing. Amazon applies a virtual andon in customer service to pull problem listings, hospitals use similar calls for patient safety, and call centres use alerts when queues or service levels cross a threshold.